Mbsm.pro, Compressor , Air Conditioning, r22, Tecumseh, AGC5568EXG, AG144UT-001-J7, 5-1/2 HP, 4 ton, R-22, 56700 btu, HBP/AC, 460V 3ph 60Hz 380-420V

written by Lilianne | 4 February 2024

The AGC5568EXG compressor has a capacity of 5.5 horsepower, which translates to approximately 4 tons of refrigeration. However, it’s important to note that the exact tonnage can vary depending on several factors, including:

  • Evaporating temperature: The compressor’s capacity is typically rated at a specific evaporating temperature, usually around 45°F (7°C). If your application operates at a different temperature, the actual tonnage will be higher or lower.
  • Condensing temperature: The condensing temperature also affects the compressor’s capacity. Higher condensing temperatures will result in lower tonnage.
  • Refrigerant type: The AGC5568EXG is designed for use with R22 refrigerant, but it may also be compatible with other refrigerants. However, the capacity will vary depending on the specific refrigerant used.

Therefore, to get the most accurate estimate of the AGC5568EXG’s tonnage for your specific application, it’s best to consult the manufacturer’s technical data sheet or contact a qualified refrigeration technician. They can consider all the relevant factors and provide you with a more precise tonnage calculation.

Product Family

AG144UT-001-J7 compressor R22 460V 3ph 5-1/2 HP air conditioning

Product Description
 
Type Reciprocating
 
Application HBP/AC – Air Conditioning
 
Refrigerant R22
 
Voltage/Frequency 460V 3~ 60Hz 380-420V 3~ 50Hz
Product Specifications
 
Performance
 
Condition ASHRAE
 
Test Voltage 380V 3~ 50HZ
 
Refrigeration Capacity
 
Btu/h 56700
 
kcal/h 14288
 
W 16613
 
Input Power
 
W 5950
 
Efficiency
 
Btu/Wh 9.5300
 
kcal/Wh 2.4000
 
W/W 2.7900
 
Evaporator Temperature 7.2°C (45°F)
 
Condensing Temperature 54°C (130°F)
 
Ambient Temperature 35°C (95°F)
 
Return Gas Temperature 35°C (95°F)
 
Liquid Temperature 46°C (115°F)
 
General
 
Evaporating Temperature Range -23.3°C to 12.8°C (-10°F to 55°F)
 
Motor Torque Low Start Torque (LST)
 
Compressor Cooling Fan
 
Mechanical
 
Displacement (cc) 124.3190
 
Oil Type Synthetic Alkylate
 
Viscosity (cSt) 53
 
Oil Charge (cc) 1955
 
Sound Power dB(A) 0
 
Electrical
 
Voltage Range (50 Hz) 342-462
 
Voltage Range (60 Hz) 414-506
 
Locked Rotor Amps (LRA) 0
 
Rated Load Amps (RLA 60 Hz) 10.6000
 
Maximum Continuous Current (MCC in Amps) 16.6000
 
Motor Resistance (Ohm) – Main 0
 
Motor Resistance (Ohm) – Start 0
 
Motor Type 3PH
 
Overload Type N/A
 
Relay Type N/A
 
Agency Approval CSA Listed, UL Recognized

Product Family

Model Number Decription Manufacturer Price Avail. Qty  
AGC5568EXG AG144UT-001-J7 5 1/2 HP R-22 Tecumseh Product Co. Call for Pricing 0
Mbsm_dot_pro_private_PDF_AGC5568EXGTélécharger


Mbsm.pro, compressor, jt160gabtal, 5 hp, 400 v, 3 ph, DAIKIN scroll, air conditioning

written by Lilianne | 4 February 2024
Model Output HP Voltage Cooling Capacity(kw) Cooling Capacity(BTU/H) COP(W/W)
JT160GABTAL 5HP 220V/60Hz 17.4 59400 3.4

  • High efficiency
  • Low sound levels
  • High reliability, long operating life
  • Wide operating voltage range
  • Special value
  • Refrigerant: R22/R410A/R407C
  • Mbsm_dot_pro_private_PDF_JT90GP8Y1


Mbsm.pro, Compressor, inverter, VTZ121AGNR1B, 60000 btu, air conditioning

written by Jamila | 4 February 2024

Description

Product details

Gross weight 43.5 kg
Net weight 40 kg
EAN 5702428666145
Gross weight 43.5 kg
Net weight 40 kg
EAN 5702428666145

Approval standard CE certified
UL certified when connected to frequency converter
Brand technique Reciprocating compressor
Capacity control Inverter
Colour Blue
Compressor power supply [V/Ph/Hz] 380-480/3/50-60
Configuration code Single
Connection type Rotolock
Cylinder 2
Description VTZ121-G
Diameter [mm] 288 mm
Discharge connection height [mm] 74 mm
Discharge connection mounting torque [Nm] 90 N-m
Discharge connection pipe size [in] 3/4 in
Discharge connection rotolock size [in] 1 1/4 in
Discharge connection size [in] 1 1/4 in
Discharge connection sleeve pipe size [in] 3/4 in
Drawing number 8502016a
Economizer No
Factory HP [bar] 25 bar
Factory LP [bar] 25 bar
Fitting remark (shipped with rotolock version only)
Fitting sleeve ODF
Fitting standard Rotolock
Frequency [Hz] 30 – 85
Gauge port HP None
Gauge port LP Schrader
Generation code A
Glass mounting Threaded
Glass torque [Nm] 50 N-m
GP LP torque [Nm] 15 N-m
High side max pressure (Ps) 29.4 bar
High Side TS Max 150 °C
High Side TS Min -35 °C
High Side Volume 0.6 L
High value of nominal voltage at 50Hz [V] 480 V
High value of nominal voltage at 60Hz [V] 480 V
High value of voltage range at 50Hz [V] 480 V
High value of voltage range at 60Hz [V] 480 V
IP protection class IP54 (with cable gland)
Low side max pressure (Ps) 22.6 bar
Low Side TS Max 50 °C
Low Side TS Min -35 °C
Low Side Volume 16.5 L
Low value of nominal voltage at 50Hz [V] 380 V
Low value of nominal voltage at 60Hz [V] 380 V
Low value of voltage range at 50Hz [V] 380 V
Low value of voltage range at 60Hz [V] 380 V
LRA 139 A
MMT 29 A
Model number VTZ121AGNR1B
Motor protection Motor protection by frequency converter
Mounting torque [Nm] 15 N-m
Nominal cooling capacity at 50Hz 6.7 kW
Nominal cooling capacity at 60Hz 14.4 kW
Number of starts per hour [Max] 12
Oil charge [L] 1.8 L
Oil equalization 3/8” flare SAE
Oil equalization torque [Nm] 30 N-m
Oil reference 160PZ
Packaging height [mm] 455 mm
Packaging length [mm] 395 mm
Packaging width [mm] 365 mm
Packing format Single pack
Packing quantity 1
Phase 3
Power connections Screw 4.8 mm
Refrigerant R134a
R404A
R407C
R507A
Refrigerant charge [kg] [Max] 5 kg
Relief valve 30 bar/8 bar
RLA 23.2 A
Rotational speed at 50Hz [rpm] 0 rpm
Rotational speed at 60Hz [rpm] 0 rpm
Segment usage Air conditioning
Refrigeration LT
Refrigeration MT
Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets
Shipped instructions Installation instructions
Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers
Shipped oil Initial oil charge
Suction connection height [mm] 165 mm
Suction connection mounting torque [Nm] 110 N-m
Suction connection pipe size [in] 1 1/8 in
Suction connection rotolock size [in] 1 3/4 in
Suction connection size [in] 1 3/4 in
Suction connection sleeve pipe size [in] 1 1/8 in
Swept volume [cm3] 120.94 cm3
Technology Reciprocating
Test dif [bar] [Max] 30 bar
Test HP [bar] [Max] 30 bar
Test LP [bar] [Max] 25 bar
Torque earth [Nm] 3 N-m
Torque power [Nm] 3 N-m
Total height [mm] 413 mm
Type VTZ
Type designation Compressor
Viscosity [cP] 32 cP
Winding resistance for three-phase compressors with identical windings [Ohm] 0.59 Ohm
Approval standard CE certified
UL certified when connected to frequency converter
Brand technique Reciprocating compressor
Capacity control Inverter
Colour Blue
Compressor power supply [V/Ph/Hz] 380-480/3/50-60
Configuration code Single
Connection type Rotolock
Cylinder 2
Description VTZ121-G
Diameter [mm] 288 mm
Discharge connection height [mm] 74 mm
Discharge connection mounting torque [Nm] 90 N-m
Discharge connection pipe size [in] 3/4 in
Discharge connection rotolock size [in] 1 1/4 in
Discharge connection size [in] 1 1/4 in
Discharge connection sleeve pipe size [in] 3/4 in
Drawing number 8502016a
Economizer No
Factory HP [bar] 25 bar
Factory LP [bar] 25 bar
Fitting remark (shipped with rotolock version only)
Fitting sleeve ODF
Fitting standard Rotolock
Frequency [Hz] 30 – 85
Gauge port HP None
Gauge port LP Schrader
Generation code A
Glass mounting Threaded
Glass torque [Nm] 50 N-m
GP LP torque [Nm] 15 N-m
High side max pressure (Ps) 29.4 bar
High Side TS Max 150 °C
High Side TS Min -35 °C
High Side Volume 0.6 L
High value of nominal voltage at 50Hz [V] 480 V
High value of nominal voltage at 60Hz [V] 480 V
High value of voltage range at 50Hz [V] 480 V
High value of voltage range at 60Hz [V] 480 V
IP protection class IP54 (with cable gland)
Low side max pressure (Ps) 22.6 bar
Low Side TS Max 50 °C
Low Side TS Min -35 °C
Low Side Volume 16.5 L
Low value of nominal voltage at 50Hz [V] 380 V
Low value of nominal voltage at 60Hz [V] 380 V
Low value of voltage range at 50Hz [V] 380 V
Low value of voltage range at 60Hz [V] 380 V
LRA 139 A
MMT 29 A
Model number VTZ121AGNR1B
Motor protection Motor protection by frequency converter
Mounting torque [Nm] 15 N-m
Nominal cooling capacity at 50Hz 6.7 kW
Nominal cooling capacity at 60Hz 14.4 kW
Number of starts per hour [Max] 12
Oil charge [L] 1.8 L
Oil equalization 3/8” flare SAE
Oil equalization torque [Nm] 30 N-m
Oil reference 160PZ
Packaging height [mm] 455 mm
Packaging length [mm] 395 mm
Packaging width [mm] 365 mm
Packing format Single pack
Packing quantity 1
Phase 3
Power connections Screw 4.8 mm
Refrigerant R134a
R404A
R407C
R507A
Refrigerant charge [kg] [Max] 5 kg
Relief valve 30 bar/8 bar
RLA 23.2 A
Rotational speed at 50Hz [rpm] 0 rpm
Rotational speed at 60Hz [rpm] 0 rpm
Segment usage Air conditioning
Refrigeration LT
Refrigeration MT
Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets
Shipped instructions Installation instructions
Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers
Shipped oil Initial oil charge
Suction connection height [mm] 165 mm
Suction connection mounting torque [Nm] 110 N-m
Suction connection pipe size [in] 1 1/8 in
Suction connection rotolock size [in] 1 3/4 in
Suction connection size [in] 1 3/4 in
Suction connection sleeve pipe size [in] 1 1/8 in
Swept volume [cm3] 120.94 cm3
Technology Reciprocating
Test dif [bar] [Max] 30 bar
Test HP [bar] [Max] 30 bar
Test LP [bar] [Max] 25 bar
Torque earth [Nm] 3 N-m
Torque power [Nm] 3 N-m
Total height [mm] 413 mm
Type VTZ
Type designation Compressor
Viscosity [cP] 32 cP
Winding resistance for three-phase compressors with identical windings [Ohm] 0.59 Ohm

Refrigerant: R134a; R404A; R407C; R507A, Segment usage: Air conditioning;Refrigeration LT;Refrigeration MT, Compressor power supply [V/Ph/Hz]: 380-480/3/50-60

Product details

Gross weight 43.5 kg
Net weight 40 kg
EAN 5702428666145
Gross weight 43.5 kg
Net weight 40 kg
EAN 5702428666145

Approval standard CE certified
UL certified when connected to frequency converter
Brand technique Reciprocating compressor
Capacity control Inverter
Colour Blue
Compressor power supply [V/Ph/Hz] 380-480/3/50-60
Configuration code Single
Connection type Rotolock
Cylinder 2
Description VTZ121-G
Diameter [mm] 288 mm
Discharge connection height [mm] 74 mm
Discharge connection mounting torque [Nm] 90 N-m
Discharge connection pipe size [in] 3/4 in
Discharge connection rotolock size [in] 1 1/4 in
Discharge connection size [in] 1 1/4 in
Discharge connection sleeve pipe size [in] 3/4 in
Drawing number 8502016a
Economizer No
Factory HP [bar] 25 bar
Factory LP [bar] 25 bar
Fitting remark (shipped with rotolock version only)
Fitting sleeve ODF
Fitting standard Rotolock
Frequency [Hz] 30 – 85
Gauge port HP None
Gauge port LP Schrader
Generation code A
Glass mounting Threaded
Glass torque [Nm] 50 N-m
GP LP torque [Nm] 15 N-m
High side max pressure (Ps) 29.4 bar
High Side TS Max 150 °C
High Side TS Min -35 °C
High Side Volume 0.6 L
High value of nominal voltage at 50Hz [V] 480 V
High value of nominal voltage at 60Hz [V] 480 V
High value of voltage range at 50Hz [V] 480 V
High value of voltage range at 60Hz [V] 480 V
IP protection class IP54 (with cable gland)
Low side max pressure (Ps) 22.6 bar
Low Side TS Max 50 °C
Low Side TS Min -35 °C
Low Side Volume 16.5 L
Low value of nominal voltage at 50Hz [V] 380 V
Low value of nominal voltage at 60Hz [V] 380 V
Low value of voltage range at 50Hz [V] 380 V
Low value of voltage range at 60Hz [V] 380 V
LRA 139 A
MMT 29 A
Model number VTZ121AGNR1B
Motor protection Motor protection by frequency converter
Mounting torque [Nm] 15 N-m
Nominal cooling capacity at 50Hz 6.7 kW
Nominal cooling capacity at 60Hz 14.4 kW
Number of starts per hour [Max] 12
Oil charge [L] 1.8 L
Oil equalization 3/8” flare SAE
Oil equalization torque [Nm] 30 N-m
Oil reference 160PZ
Packaging height [mm] 455 mm
Packaging length [mm] 395 mm
Packaging width [mm] 365 mm
Packing format Single pack
Packing quantity 1
Phase 3
Power connections Screw 4.8 mm
Refrigerant R134a
R404A
R407C
R507A
Refrigerant charge [kg] [Max] 5 kg
Relief valve 30 bar/8 bar
RLA 23.2 A
Rotational speed at 50Hz [rpm] 0 rpm
Rotational speed at 60Hz [rpm] 0 rpm
Segment usage Air conditioning
Refrigeration LT
Refrigeration MT
Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets
Shipped instructions Installation instructions
Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers
Shipped oil Initial oil charge
Suction connection height [mm] 165 mm
Suction connection mounting torque [Nm] 110 N-m
Suction connection pipe size [in] 1 1/8 in
Suction connection rotolock size [in] 1 3/4 in
Suction connection size [in] 1 3/4 in
Suction connection sleeve pipe size [in] 1 1/8 in
Swept volume [cm3] 120.94 cm3
Technology Reciprocating
Test dif [bar] [Max] 30 bar
Test HP [bar] [Max] 30 bar
Test LP [bar] [Max] 25 bar
Torque earth [Nm] 3 N-m
Torque power [Nm] 3 N-m
Total height [mm] 413 mm
Type VTZ
Type designation Compressor
Viscosity [cP] 32 cP
Winding resistance for three-phase compressors with identical windings [Ohm] 0.59 Ohm
Approval standard CE certified
UL certified when connected to frequency converter
Brand technique Reciprocating compressor
Capacity control Inverter
Colour Blue
Compressor power supply [V/Ph/Hz] 380-480/3/50-60
Configuration code Single
Connection type Rotolock
Cylinder 2
Description VTZ121-G
Diameter [mm] 288 mm
Discharge connection height [mm] 74 mm
Discharge connection mounting torque [Nm] 90 N-m
Discharge connection pipe size [in] 3/4 in
Discharge connection rotolock size [in] 1 1/4 in
Discharge connection size [in] 1 1/4 in
Discharge connection sleeve pipe size [in] 3/4 in
Drawing number 8502016a
Economizer No
Factory HP [bar] 25 bar
Factory LP [bar] 25 bar
Fitting remark (shipped with rotolock version only)
Fitting sleeve ODF
Fitting standard Rotolock
Frequency [Hz] 30 – 85
Gauge port HP None
Gauge port LP Schrader
Generation code A
Glass mounting Threaded
Glass torque [Nm] 50 N-m
GP LP torque [Nm] 15 N-m
High side max pressure (Ps) 29.4 bar
High Side TS Max 150 °C
High Side TS Min -35 °C
High Side Volume 0.6 L
High value of nominal voltage at 50Hz [V] 480 V
High value of nominal voltage at 60Hz [V] 480 V
High value of voltage range at 50Hz [V] 480 V
High value of voltage range at 60Hz [V] 480 V
IP protection class IP54 (with cable gland)
Low side max pressure (Ps) 22.6 bar
Low Side TS Max 50 °C
Low Side TS Min -35 °C
Low Side Volume 16.5 L
Low value of nominal voltage at 50Hz [V] 380 V
Low value of nominal voltage at 60Hz [V] 380 V
Low value of voltage range at 50Hz [V] 380 V
Low value of voltage range at 60Hz [V] 380 V
LRA 139 A
MMT 29 A
Model number VTZ121AGNR1B
Motor protection Motor protection by frequency converter
Mounting torque [Nm] 15 N-m
Nominal cooling capacity at 50Hz 6.7 kW
Nominal cooling capacity at 60Hz 14.4 kW
Number of starts per hour [Max] 12
Oil charge [L] 1.8 L
Oil equalization 3/8” flare SAE
Oil equalization torque [Nm] 30 N-m
Oil reference 160PZ
Packaging height [mm] 455 mm
Packaging length [mm] 395 mm
Packaging width [mm] 365 mm
Packing format Single pack
Packing quantity 1
Phase 3
Power connections Screw 4.8 mm
Refrigerant R134a
R404A
R407C
R507A
Refrigerant charge [kg] [Max] 5 kg
Relief valve 30 bar/8 bar
RLA 23.2 A
Rotational speed at 50Hz [rpm] 0 rpm
Rotational speed at 60Hz [rpm] 0 rpm
Segment usage Air conditioning
Refrigeration LT
Refrigeration MT
Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets
Shipped instructions Installation instructions
Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers
Shipped oil Initial oil charge
Suction connection height [mm] 165 mm
Suction connection mounting torque [Nm] 110 N-m
Suction connection pipe size [in] 1 1/8 in
Suction connection rotolock size [in] 1 3/4 in
Suction connection size [in] 1 3/4 in
Suction connection sleeve pipe size [in] 1 1/8 in
Swept volume [cm3] 120.94 cm3
Technology Reciprocating
Test dif [bar] [Max] 30 bar
Test HP [bar] [Max] 30 bar
Test LP [bar] [Max] 25 bar
Torque earth [Nm] 3 N-m
Torque power [Nm] 3 N-m
Total height [mm] 413 mm
Type VTZ
Type designation Compressor
Viscosity [cP] 32 cP
Winding resistance for three-phase compressors with identical windings [Ohm] 0.59 Ohm